Product Description
The EC-3000 EVO Hill Electric Air Compressor
Some Features of the EC-3000:
Now you can fill your airguns AND your Scuba tanks at home or at your local Club.
Quietest Compressor on the market running at just 75db*.
Fast fill - Pistols approx. 1min and Air Rifles approx. 3min from 0 to 250 bar.
Proudly Designed, Manufactured and Assembled by Hill Pumps in Sheffield Great Britain.
The new EVO has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience.
There is now a built in an Automatic Air Pressure Purge. This kicks in whenever the motor on the compressor stops. So when it goes into a cooling cycle or when a fill is paused or finished. This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit. This is very important for people filling larger rifles or Scuba style tanks.
The new EVO also benefits from continuous improvement in research and development, including a new super durable Shuttle Valve, which we made from some quite exotic materials. This gives the compressors a unique sound compared to other compressors and are very efficient, extremely long lasting and whenever you hear it, you will now it�s a Hill Compressor!
There�s a new highly accurate digital pressure sensor with an additional analogue gauge, that is extremely accurate, but also means that you no longer need to recalibrate the compressor following a major service.
The EVO can be set as low as 50 bar (755 psi) and up to 310 bar (4500 psi).
The EVO also benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by our own software and electronics engineers, and believe it or not, even PCB's are manufactured here in Sheffield too.
This new EVO is incredibly simple to service and maintain, with tutorial videos available on our YouTube Channel (search Hill Pumps) along with their amazing team of customer support staff based in our Sheffield office.
For the ultimate in moisture protection for your gun it is highly recommended to use the Hill Dry-Pac Pro which is fully compatible with both the EC-3000 evo and the original EC-3000 models (sold separately).
Both our crank and silicone oils have been specifically manufactured and designed for use with the EC-3000 EVO Electric Compressors. No other oils should be used.
- The Crank Case Oil (Red) is in the perfect size bottle for the unit as it takes almost the whole bottle to fill the crank properly on the initial fill and should not need topping up for some time. When filling the crank oil please ensure that it is filled properly, this should require near enough the whole 50ml bottle.
- The Silicone Oil (Clear) is used all the time by the pump and should need replacing after approximately 50 hours of run time, this is also the correct point to change the Crank Oil.
Oil and parts are available in our shop including oil and filter refills.
DISCLAIMER: *Information taken from Hill Pumps literature. Due care should always be taken when filling tanks and using compressors including the regulations regarding age and condition of tanks and bottles being filled. Instructions must be read and followed. No responsibility is accepted regarding the use of this product.
