Product Description
Quick Connector Starter Kit PCP Hose Coupler Set by Best Fittings.
BEST Fittings Quick Coupler starter kits offer a high quality cost effective, slim line solution enabling the quick and easy change over from one filling probe to another.
Compatible with all fill probes with the Industry Standard 1/8? BSP male thread and hoses with a 1/8? BSP Female.
Pack contains:
1 x BEST Fittings 1/8? BSP Quick Coupler Socket Snap On Connector
2 x Quick Coupler Plugs with Bonded Seal Washers
1 x Stainless Steel Combined Pressure Test/Dust plug
Operating Instructions:
Fit the socket to the fill line. Finger tight + 1/2 a turn with spanners is sufficient.
Fit a bonded seal washer over the thread of your fill probe.
Screw on a quick coupler plug and nip up with spanners.
Now simply snap the appropriate fill probe into the socket and fill.
The cylinder pressure test/dust plug can be installed into the female socket when not in use, and if you open the cylinder valve with the plug in, you can read your remaining cylinder pressure on the cylinder gauge. Bleed the fill line after use.
General fitting instructions:
Quick coupler sockets and hose assemblies.
Tighten finger tight plus a quarter turn.
If leeks are evident tightened by quarter turns only .
Quick coupler plugs.
Place the bonded seal washer over male thread.
Titan the plug against the washer using spanners.
Filling connector important information.
This best fittings connector contains an airflow restrictor to aid controlled filling of a PCP when using a dive cylinder.
If using a flow restricted cylinder valve a stirruper pump or where quick closure of the feel valve is required the grub screw type flow restrictor can simply be removed using a small flat bladed�screwdriver.
